Tweco ArcMaster 401S Manuel d'utilisateur télécharger pdf (Page 16)

ARCMASTER 401S POWER SOURCE

INTRODUCTION 2-2 Manual 0-5345

2.04 Description

The Tweco ArcMaster 401S is a welding power source

incorporating to provide TIG, Stick and Gouging weld-

ing process.

The units are also fully compliant to CSA E 60974-1

and UL 60974-1.

The following instructions detail how to correctly and

safely set up the machine and give guidelines on gaining

the best efﬁciency and quality from the Power Source.

Please read these instructions thoroughly before using

the unit.

2.05 User Responsibility

This equipment will perform as per the information con-

tained herein when installed, operated, maintained and

repaired in accordance with the instructions provided.

This equipment must be checked periodically. Defective

equipment (including welding leads) should not be used.

Parts that are broken, missing, plainly worn, distorted or

contaminated, should be replaced immediately. Should

such repairs or replacements become necessary, it

is recommended that such repairs be carried out by

appropriately qualiﬁed persons approved by Tweco.

Advice in this regard can be obtained by contacting an

Accredited Tweco Distributor.

This equipment or any of its parts should not be altered

from standard speciﬁcation without prior written ap-

proval of Tweco. The user of this equipment shall have

the sole responsibility for any malfunction which results

from improper use or unauthorized modiﬁcation from

standard speciﬁcation, faulty maintenance, damage or

improper repair by anyone other than appropriately

qualiﬁed persons approved by Tweco.

2.06 Transporting Methods

Disconnect input power con-

ductors from de-energized supply line before moving

the welding Power Source.

Lift Power Source with handle on top of case. Use

handcart or similar device of adequate capacity. If using

a fork lift vehicle, secure the Power Source on a proper

skid before transporting.

2.07 Packaged Items

ArcMaster 401S Inverter Power Source (Part

No. W1009100)

• ArcMaster401SInverter Power Sourcew/10ft

input power cable

• 50mm male Dinse connector × 2

• OperatingManual,English

• CD-OperatingManual(Eng/Fr/Sp)

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Tweco ArcMaster 401S Manuel d'utilisateur Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Tweco ArcMaster 401S