Tweco Victor Thermal Dynamics Power Module Upgrade Kit Manuel d'utilisateur télécharger pdf (Page 4)

4 Manual 0-5326

10. Reroute the cooling hose return from the lower position to the upper position. For 300 and 400 amp upgrades

use Figure 1B routing the hose behind the pilot board assembly and down from the inverter side down to

the coolant tank. Figure 1A 200A return hose routing. Figure 1B 300A and 400A return hose routing.

Art # A-12327

Figure 1a Figure 1b

11.Runnewpowercablesfrominvertersidetothecoolantside.Thereshouldbeabout9"ofcablestickingout

of the grommet to connect to the inverter.

Art # A-12328

1 2 3 4 5 6 7 8 9 ... 15 16

Pas de commentaire

Tweco Victor Thermal Dynamics Power Module Upgrade Kit Manuel d'utilisateur Page 4