Tweco Fabricator 141i Operating Manual Manuel d'utilisateur télécharger pdf (Page 57)

Fabricator 141i

Manual 0-51

45

3-27 INSTALLATION, OPERATION AND SETUP

Art # A-11576_AB

MIG Torch

polarity lead

not connected

Note: A Tweco 17V TIG torch with

an 8 pin plug must be used to turn the

weld current on/off via the TIG torch trigger

switch to TIG weld OR a Tweco Foot Control

with an 8 pin plug must be used to turn the

weld current on/off as well as providing

remote control of the weld current.

Connect to shielding gas

regulator/ﬂow gauge.

Secure the gas cylinder

in an upright position by

chaining it to a stationary

support to prevent falling

or tipping.

Negative welding terminal (-)

50mm- 25mm Adaptor

Positive Welding

Terminal (+)

TIG Torch

Work Lead

Figure 3-18: Setup for TIG Welding

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 103 104

Commentaires sur ces manuels

Pas de commentaire